Change in openvpn[master]: Try to emphasise the difference between new ovpn and old ovpn-dco
A message that is not in the archive (sent off-list or not yet received): gerrit.1771675669000.Iff9f6811fdf553f59f2afee0072d7bf90133d328@...2715...
plaisthos has uploaded this change for review. ( http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email )
Change subject: Try to emphasise the difference between new ovpn and old ovpn-dco
......................................................................
Try to emphasise the difference between new ovpn and old ovpn-dco
This tries to ensure that the difference between the old and new module is clearer.
Also removed a duplicate section about --disable-dco from the manual page.
Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
---
M Changes.rst
M configure.ac
M doc/man-sections/advanced-options.rst
M doc/man-sections/generic-options.rst
M src/openvpn/dco.c
M src/openvpn/dco_linux.c
6 files changed, 15 insertions(+), 18 deletions(-)
git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/50/1550/1
Changes.rst +4 -3
@@ -55,10 +55,11 @@ Support for new version of Linux DCO module OpenVPN DCO module is moving upstream and being merged into the - main Linux kernel. For this process some API changes were required. + main Linux kernel in 6.16. For this process some API changes were required. OpenVPN 2.7 will only support the new API. The new module is called - ``ovpn``. Out-of-tree builds for older kernels are available. Please - see the release announcements for futher information. + ``ovpn``. Out-of-tree builds for older kernels are available from + https://github.com/OpenVPN/ovpn-backports. Please + see the release announcements for further information. Support for server mode in win-dco driver On Windows the win-dco driver can now be used in server setups.
configure.ac +1 -1
@@ -731,7 +731,7 @@ OPTIONAL_LIBNL_GENL_LIBS="${LIBNL_GENL_LIBS}" AC_DEFINE(ENABLE_DCO, 1, [Enable shared data channel offload]) - AC_MSG_NOTICE([Enabled ovpn-dco support for Linux]) + AC_MSG_NOTICE([Enabled ovpn-dco (via ovpn kernel module) support for Linux]) fi ;; *-*-freebsd*)
doc/man-sections/advanced-options.rst +3 -1
@@ -102,7 +102,9 @@ Data channel offload currently requires data-ciphers to only contain AEAD ciphers (AES-GCM and Chacha20-Poly1305) and Linux with the - ovpn-dco module. + ovpn module. The ovpn module is integrated into the Linux kernel + since 6.16 or available as backport from + https://github.com/OpenVPN/ovpn-backports. Note that some options have no effect or cannot be used when DCO mode is enabled.
doc/man-sections/generic-options.rst +0 -9
@@ -178,15 +178,6 @@ on console) and ``--auth-nocache`` will fail as soon as key renegotiation (and reauthentication) occurs. ---disable-dco - Disable "data channel offload" (DCO). - - On Linux don't use the ovpn-dco device driver, but rather rely on the - legacy tun module. - - You may want to use this option if your server needs to allow clients - older than version 2.4 to connect. - --disable-occ **DEPRECATED** Disable "options consistency check" (OCC) in configurations that do not use TLS.
src/openvpn/dco.c +3 -2
@@ -376,9 +376,10 @@* don't need to have the net_ctx percolate all the way here */ int ret =net_iface_type (NULL , o->dev, iftype); -if ((ret ==0 ) && (strcmp (iftype,"ovpn-dco" ) !=0 )) +if ((ret ==0 ) && (strcmp (iftype,"ovpn" ) !=0 )) { -msg (msglevel,"Interface %s exists and is non-DCO. Disabling data channel offload" , +msg (msglevel,"Interface %s exists and its not using " +"ovpn DCO driver. Disabling data channel offload" , o->dev);return false; }
src/openvpn/dco_linux.c +4 -2
@@ -159,7 +159,7 @@break ;case -NLE_OBJ_NOTFOUND : -msg (M_INFO ,"%s: netlink reports object not found, ovpn-dco unloaded?" , prefix); +msg (M_INFO ,"%s: netlink reports object not found, ovpn kernel module unloaded?" , prefix);break ;default :
@@ -1239,7 +1239,9 @@ {if (resolve_ovpn_netlink_id (D_DCO_DEBUG ) <0 ) { -msg (msglevel,"Note: Kernel support for ovpn-dco missing, disabling data channel offload." ); +msg (msglevel,"Note: Kernel support for ovpn missing, disabling data " +"channel offload. Use a 6.16.0 kernel with ovpn or use" +"ovpn-backports to enable data channel offload." );return false; }
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: newchange
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 1
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveplaisthos has uploaded a new patch set (#2). ( http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email )
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Try to emphasise the transition from old ovpn-dco to new ovpn module
This tries to ensure that the difference between the old and new module is clearer.
Also removed a duplicate section about --disable-dco from the manual page.
This also changes one instance of ovpn-dco to ovpn that is probably a bug when reusing a tun device.
---
M Changes.rst
M configure.ac
M doc/man-sections/advanced-options.rst
M doc/man-sections/generic-options.rst
M src/openvpn/dco.c
M src/openvpn/dco_linux.c
6 files changed, 15 insertions(+), 18 deletions(-)
git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/50/1550/2
Changes.rst +4 -3
@@ -55,10 +55,11 @@ Support for new version of Linux DCO module OpenVPN DCO module is moving upstream and being merged into the - main Linux kernel. For this process some API changes were required. + main Linux kernel in 6.16. For this process some API changes were required. OpenVPN 2.7 will only support the new API. The new module is called - ``ovpn``. Out-of-tree builds for older kernels are available. Please - see the release announcements for futher information. + ``ovpn``. Out-of-tree builds for older kernels are available from + https://github.com/OpenVPN/ovpn-backports. Please + see the release announcements for further information. Support for server mode in win-dco driver On Windows the win-dco driver can now be used in server setups.
configure.ac +1 -1
@@ -731,7 +731,7 @@ OPTIONAL_LIBNL_GENL_LIBS="${LIBNL_GENL_LIBS}" AC_DEFINE(ENABLE_DCO, 1, [Enable shared data channel offload]) - AC_MSG_NOTICE([Enabled ovpn-dco support for Linux]) + AC_MSG_NOTICE([Enabled ovpn-dco (via ovpn kernel module) support for Linux]) fi ;; *-*-freebsd*)
doc/man-sections/advanced-options.rst +3 -1
@@ -102,7 +102,9 @@ Data channel offload currently requires data-ciphers to only contain AEAD ciphers (AES-GCM and Chacha20-Poly1305) and Linux with the - ovpn-dco module. + ovpn module. The ovpn module is integrated into the Linux kernel + since 6.16 or available as backport from + https://github.com/OpenVPN/ovpn-backports. Note that some options have no effect or cannot be used when DCO mode is enabled.
doc/man-sections/generic-options.rst +0 -9
@@ -178,15 +178,6 @@ on console) and ``--auth-nocache`` will fail as soon as key renegotiation (and reauthentication) occurs. ---disable-dco - Disable "data channel offload" (DCO). - - On Linux don't use the ovpn-dco device driver, but rather rely on the - legacy tun module. - - You may want to use this option if your server needs to allow clients - older than version 2.4 to connect. - --disable-occ **DEPRECATED** Disable "options consistency check" (OCC) in configurations that do not use TLS.
src/openvpn/dco.c +3 -2
@@ -376,9 +376,10 @@* don't need to have the net_ctx percolate all the way here */ int ret =net_iface_type (NULL , o->dev, iftype); -if ((ret ==0 ) && (strcmp (iftype,"ovpn-dco" ) !=0 )) +if ((ret ==0 ) && (strcmp (iftype,"ovpn" ) !=0 )) { -msg (msglevel,"Interface %s exists and is non-DCO. Disabling data channel offload" , +msg (msglevel,"Interface %s exists and its not using " +"ovpn DCO driver. Disabling data channel offload" , o->dev);return false; }
src/openvpn/dco_linux.c +4 -2
@@ -159,7 +159,7 @@break ;case -NLE_OBJ_NOTFOUND : -msg (M_INFO ,"%s: netlink reports object not found, ovpn-dco unloaded?" , prefix); +msg (M_INFO ,"%s: netlink reports object not found, ovpn kernel module unloaded?" , prefix);break ;default :
@@ -1239,7 +1239,9 @@ {if (resolve_ovpn_netlink_id (D_DCO_DEBUG ) <0 ) { -msg (msglevel,"Note: Kernel support for ovpn-dco missing, disabling data channel offload." ); +msg (msglevel,"Note: Kernel support for ovpn missing, disabling data " +"channel offload. Use a 6.16.0 kernel with ovpn or use" +"ovpn-backports to enable data channel offload." );return false; }
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: newpatchset
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 2
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveAttention is currently required from: plaisthos.
flichtenheld has posted comments on this change by plaisthos. ( http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email )
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Patch Set 2: Code-Review-1
(2 comments)
File src/openvpn/dco.c:
http://gerrit.openvpn.net/c/openvpn/+/1550/comment/3d39cde6_b84c1d54?usp=email :
PS2, Line 381: msg(msglevel, "Interface %s exists and its not using "
"its not using" -> "it's not using the" or "it doesn't use the"
File src/openvpn/dco_linux.c:
http://gerrit.openvpn.net/c/openvpn/+/1550/comment/b3f4cb99_801a0e11?usp=email :
PS2, Line 1244: "ovpn-backports to enable data channel offload.");
Replace redundant "data channel offload" with "enable it"?
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: comment
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 2
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Comment-Date: Fri, 06 Mar 2026 13:59:13 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: Yes
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveAttention is currently required from: flichtenheld.
plaisthos has posted comments on this change by plaisthos. ( http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email )
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Patch Set 2:
(2 comments)
File src/openvpn/dco.c:
http://gerrit.openvpn.net/c/openvpn/+/1550/comment/d69c5c22_e41422ac?usp=email :
PS2, Line 381: msg(msglevel, "Interface %s exists and its not using "
Quoted 1 line
"its not using" -> "it's not using the" or "it doesn't use the"
Done
File src/openvpn/dco_linux.c:
http://gerrit.openvpn.net/c/openvpn/+/1550/comment/f1eb5789_7fb2d671?usp=email :
PS2, Line 1244: "ovpn-backports to enable data channel offload.");
Quoted 1 line
Replace redundant "data channel offload" with "enable it"?
enable it feels a bit too short here. I feel a bit better with repeating it here to make it a more clear. But I rewrote the sentence to make it a less annoying.
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: comment
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 2
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: flichtenheld <[email protected]...>
Gerrit-Comment-Date: Mon, 09 Mar 2026 12:52:28 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: flichtenheld <[email protected]...>
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveAttention is currently required from: flichtenheld.
Hello flichtenheld,
I'd like you to reexamine a change. Please visit
http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
to look at the new patch set (#3).
The following approvals got outdated and were removed:
Code-Review-1 by flichtenheld
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Try to emphasise the transition from old ovpn-dco to new ovpn module
This tries to ensure that the difference between the old and new module is clearer.
Also removed a duplicate section about --disable-dco from the manual page.
This also changes one instance of ovpn-dco to ovpn that is probably a bug when reusing a tun device.
---
M Changes.rst
M configure.ac
M doc/man-sections/advanced-options.rst
M doc/man-sections/generic-options.rst
M src/openvpn/dco.c
M src/openvpn/dco_linux.c
6 files changed, 16 insertions(+), 18 deletions(-)
git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/50/1550/3
Changes.rst +4 -3
@@ -55,10 +55,11 @@ Support for new version of Linux DCO module OpenVPN DCO module is moving upstream and being merged into the - main Linux kernel. For this process some API changes were required. + main Linux kernel in 6.16. For this process some API changes were required. OpenVPN 2.7 will only support the new API. The new module is called - ``ovpn``. Out-of-tree builds for older kernels are available. Please - see the release announcements for futher information. + ``ovpn``. Out-of-tree builds for older kernels are available from + https://github.com/OpenVPN/ovpn-backports. Please + see the release announcements for further information. Support for server mode in win-dco driver On Windows the win-dco driver can now be used in server setups.
configure.ac +1 -1
@@ -731,7 +731,7 @@ OPTIONAL_LIBNL_GENL_LIBS="${LIBNL_GENL_LIBS}" AC_DEFINE(ENABLE_DCO, 1, [Enable shared data channel offload]) - AC_MSG_NOTICE([Enabled ovpn-dco support for Linux]) + AC_MSG_NOTICE([Enabled ovpn-dco (via ovpn kernel module) support for Linux]) fi ;; *-*-freebsd*)
doc/man-sections/advanced-options.rst +3 -1
@@ -102,7 +102,9 @@ Data channel offload currently requires data-ciphers to only contain AEAD ciphers (AES-GCM and Chacha20-Poly1305) and Linux with the - ovpn-dco module. + ovpn module. The ovpn module is integrated into the Linux kernel + since 6.16 or available as backport from + https://github.com/OpenVPN/ovpn-backports. Note that some options have no effect or cannot be used when DCO mode is enabled.
doc/man-sections/generic-options.rst +0 -9
@@ -178,15 +178,6 @@ on console) and ``--auth-nocache`` will fail as soon as key renegotiation (and reauthentication) occurs. ---disable-dco - Disable "data channel offload" (DCO). - - On Linux don't use the ovpn-dco device driver, but rather rely on the - legacy tun module. - - You may want to use this option if your server needs to allow clients - older than version 2.4 to connect. - --disable-occ **DEPRECATED** Disable "options consistency check" (OCC) in configurations that do not use TLS.
src/openvpn/dco.c +3 -2
@@ -376,9 +376,10 @@* don't need to have the net_ctx percolate all the way here */ int ret =net_iface_type (NULL , o->dev, iftype); -if ((ret ==0 ) && (strcmp (iftype,"ovpn-dco" ) !=0 )) +if ((ret ==0 ) && (strcmp (iftype,"ovpn" ) !=0 )) { -msg (msglevel,"Interface %s exists and is non-DCO. Disabling data channel offload" , +msg (msglevel,"Interface %s exists and is not using the " +"ovpn DCO driver. Disabling data channel offload" , o->dev);return false; }
src/openvpn/dco_linux.c +5 -2
@@ -159,7 +159,7 @@break ;case -NLE_OBJ_NOTFOUND : -msg (M_INFO ,"%s: netlink reports object not found, ovpn-dco unloaded?" , prefix); +msg (M_INFO ,"%s: netlink reports object not found, ovpn kernel module unloaded?" , prefix);break ;default :
@@ -1248,7 +1248,10 @@ {if (resolve_ovpn_netlink_id (D_DCO_DEBUG ) <0 ) { -msg (msglevel,"Note: Kernel support for ovpn-dco missing, disabling data channel offload." ); +msg (msglevel,"Note: Kernel support for ovpn interfaces missing, " +"disabling data channel offload. Use Linux 6.16.0 or" +"newer with ovpn support or use ovpn-backports for " +"interface support." );return false; }
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: newpatchset
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 3
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: flichtenheld <[email protected]...>
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveAttention is currently required from: plaisthos.
flichtenheld has posted comments on this change by plaisthos. ( http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email )
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Patch Set 3: Code-Review-1
(2 comments)
File src/openvpn/dco_linux.c:
http://gerrit.openvpn.net/c/openvpn/+/1550/comment/49bc0292_8cc8048e?usp=email :
PS2, Line 1244: "ovpn-backports to enable data channel offload.");
Quoted 1 line
enable it feels a bit too short here. […]
Done
File src/openvpn/dco_linux.c:
http://gerrit.openvpn.net/c/openvpn/+/1550/comment/eaf1e7cc_d77f45d6?usp=email :
PS3, Line 1252: "disabling data channel offload. Use Linux 6.16.0 or"
missing space
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: comment
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 3
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Comment-Date: Mon, 09 Mar 2026 13:15:41 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: Yes
Comment-In-Reply-To: plaisthos <[email protected]...>
Comment-In-Reply-To: flichtenheld <[email protected]...>
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveAttention is currently required from: flichtenheld.
plaisthos has posted comments on this change by plaisthos. ( http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email )
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Patch Set 3:
(1 comment)
File src/openvpn/dco_linux.c:
http://gerrit.openvpn.net/c/openvpn/+/1550/comment/1c2d16cf_28a9a156?usp=email :
PS3, Line 1252: "disabling data channel offload. Use Linux 6.16.0 or"
Quoted 1 line
missing space
Done
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: comment
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 3
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: flichtenheld <[email protected]...>
Gerrit-Comment-Date: Thu, 19 Mar 2026 14:18:30 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: flichtenheld <[email protected]...>
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveAttention is currently required from: flichtenheld.
Hello flichtenheld,
I'd like you to reexamine a change. Please visit
http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
to look at the new patch set (#4).
The following approvals got outdated and were removed:
Code-Review-1 by flichtenheld
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Try to emphasise the transition from old ovpn-dco to new ovpn module
This tries to ensure that the difference between the old and new module is clearer.
Also removed a duplicate section about --disable-dco from the manual page.
This also changes one instance of ovpn-dco to ovpn that is probably a bug when reusing a tun device.
---
M Changes.rst
M configure.ac
M doc/man-sections/advanced-options.rst
M doc/man-sections/generic-options.rst
M src/openvpn/dco.c
M src/openvpn/dco_linux.c
6 files changed, 16 insertions(+), 18 deletions(-)
git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/50/1550/4
Changes.rst +4 -3
@@ -55,10 +55,11 @@ Support for new version of Linux DCO module OpenVPN DCO module is moving upstream and being merged into the - main Linux kernel. For this process some API changes were required. + main Linux kernel in 6.16. For this process some API changes were required. OpenVPN 2.7 will only support the new API. The new module is called - ``ovpn``. Out-of-tree builds for older kernels are available. Please - see the release announcements for futher information. + ``ovpn``. Out-of-tree builds for older kernels are available from + https://github.com/OpenVPN/ovpn-backports. Please + see the release announcements for further information. Support for server mode in win-dco driver On Windows the win-dco driver can now be used in server setups.
configure.ac +1 -1
@@ -731,7 +731,7 @@ OPTIONAL_LIBNL_GENL_LIBS="${LIBNL_GENL_LIBS}" AC_DEFINE(ENABLE_DCO, 1, [Enable shared data channel offload]) - AC_MSG_NOTICE([Enabled ovpn-dco support for Linux]) + AC_MSG_NOTICE([Enabled ovpn-dco (via ovpn kernel module) support for Linux]) fi ;; *-*-freebsd*)
doc/man-sections/advanced-options.rst +3 -1
@@ -102,7 +102,9 @@ Data channel offload currently requires data-ciphers to only contain AEAD ciphers (AES-GCM and Chacha20-Poly1305) and Linux with the - ovpn-dco module. + ovpn module. The ovpn module is integrated into the Linux kernel + since 6.16 or available as backport from + https://github.com/OpenVPN/ovpn-backports. Note that some options have no effect or cannot be used when DCO mode is enabled.
doc/man-sections/generic-options.rst +0 -9
@@ -178,15 +178,6 @@ on console) and ``--auth-nocache`` will fail as soon as key renegotiation (and reauthentication) occurs. ---disable-dco - Disable "data channel offload" (DCO). - - On Linux don't use the ovpn-dco device driver, but rather rely on the - legacy tun module. - - You may want to use this option if your server needs to allow clients - older than version 2.4 to connect. - --disable-occ **DEPRECATED** Disable "options consistency check" (OCC) in configurations that do not use TLS.
src/openvpn/dco.c +3 -2
@@ -376,9 +376,10 @@* don't need to have the net_ctx percolate all the way here */ int ret =net_iface_type (NULL , o->dev, iftype); -if ((ret ==0 ) && (strcmp (iftype,"ovpn-dco" ) !=0 )) +if ((ret ==0 ) && (strcmp (iftype,"ovpn" ) !=0 )) { -msg (msglevel,"Interface %s exists and is non-DCO. Disabling data channel offload" , +msg (msglevel,"Interface %s exists and is not using the " +"ovpn DCO driver. Disabling data channel offload" , o->dev);return false; }
src/openvpn/dco_linux.c +5 -2
@@ -159,7 +159,7 @@break ;case -NLE_OBJ_NOTFOUND : -msg (M_INFO ,"%s: netlink reports object not found, ovpn-dco unloaded?" , prefix); +msg (M_INFO ,"%s: netlink reports object not found, ovpn kernel module unloaded?" , prefix);break ;default :
@@ -1248,7 +1248,10 @@ {if (resolve_ovpn_netlink_id (D_DCO_DEBUG ) <0 ) { -msg (msglevel,"Note: Kernel support for ovpn-dco missing, disabling data channel offload." ); +msg (msglevel,"Note: Kernel support for ovpn interfaces missing, " +"disabling data channel offload. Use Linux 6.16.0 or " +"newer with ovpn support or use ovpn-backports for " +"interface support." );return false; }
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: newpatchset
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 4
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: flichtenheld <[email protected]...>
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveAttention is currently required from: flichtenheld, plaisthos.
ordex has posted comments on this change by plaisthos. ( http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email )
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Patch Set 4: Code-Review-1
(3 comments)
Patchset:
PS4:
just commented on the Changes.rst. The rest looks good, thanks!
File Changes.rst:
http://gerrit.openvpn.net/c/openvpn/+/1550/comment/55e085cb_b07dee76?usp=email :
PS4, Line 58: main Linux kernel in 6.16. For this process some API changes were required.
should we say "it was merged" rather than "is moving and being merged" ?
http://gerrit.openvpn.net/c/openvpn/+/1550/comment/fcd45209_ef57bfe8?usp=email :
PS4, Line 59: OpenVPN 2.7 will only support the new API. The new module is called
and maybe here remove "will" and just say "only supports"?
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: comment
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 4
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: ordex <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Attention: flichtenheld <[email protected]...>
Gerrit-Comment-Date: Thu, 19 Mar 2026 14:33:17 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: Yes
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveAttention is currently required from: flichtenheld, ordex, plaisthos.
Hello flichtenheld, ordex,
I'd like you to reexamine a change. Please visit
http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
to look at the new patch set (#5).
The following approvals got outdated and were removed:
Code-Review-1 by ordex
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Try to emphasise the transition from old ovpn-dco to new ovpn module
This tries to ensure that the difference between the old and new module is clearer.
Also removed a duplicate section about --disable-dco from the manual page.
This also changes one instance of ovpn-dco to ovpn that is probably a bug when reusing a tun device.
---
M Changes.rst
M configure.ac
M doc/man-sections/advanced-options.rst
M doc/man-sections/generic-options.rst
M src/openvpn/dco.c
M src/openvpn/dco_linux.c
6 files changed, 18 insertions(+), 20 deletions(-)
git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/50/1550/5
Changes.rst +6 -5
@@ -54,11 +54,12 @@ are not readable for ``NT SERVICE\OpenVPNService``. Support for new version of Linux DCO module - OpenVPN DCO module is moving upstream and being merged into the - main Linux kernel. For this process some API changes were required. - OpenVPN 2.7 will only support the new API. The new module is called - ``ovpn``. Out-of-tree builds for older kernels are available. Please - see the release announcements for futher information. + The OpenVPN DCO module has been merged into the Linux kernel in 6.16. + This required some API changes and OpenVPN 2.7 will only supports the + new API. The new module is called ``ovpn``. Out-of-tree builds for + older kernels are available from + https://github.com/OpenVPN/ovpn-backports. Please + see the release announcements for further information. Support for server mode in win-dco driver On Windows the win-dco driver can now be used in server setups.
configure.ac +1 -1
@@ -731,7 +731,7 @@ OPTIONAL_LIBNL_GENL_LIBS="${LIBNL_GENL_LIBS}" AC_DEFINE(ENABLE_DCO, 1, [Enable shared data channel offload]) - AC_MSG_NOTICE([Enabled ovpn-dco support for Linux]) + AC_MSG_NOTICE([Enabled ovpn-dco (via ovpn kernel module) support for Linux]) fi ;; *-*-freebsd*)
doc/man-sections/advanced-options.rst +3 -1
@@ -102,7 +102,9 @@ Data channel offload currently requires data-ciphers to only contain AEAD ciphers (AES-GCM and Chacha20-Poly1305) and Linux with the - ovpn-dco module. + ovpn module. The ovpn module is integrated into the Linux kernel + since 6.16 or available as backport from + https://github.com/OpenVPN/ovpn-backports. Note that some options have no effect or cannot be used when DCO mode is enabled.
doc/man-sections/generic-options.rst +0 -9
@@ -178,15 +178,6 @@ on console) and ``--auth-nocache`` will fail as soon as key renegotiation (and reauthentication) occurs. ---disable-dco - Disable "data channel offload" (DCO). - - On Linux don't use the ovpn-dco device driver, but rather rely on the - legacy tun module. - - You may want to use this option if your server needs to allow clients - older than version 2.4 to connect. - --disable-occ **DEPRECATED** Disable "options consistency check" (OCC) in configurations that do not use TLS.
src/openvpn/dco.c +3 -2
@@ -376,9 +376,10 @@* don't need to have the net_ctx percolate all the way here */ int ret =net_iface_type (NULL , o->dev, iftype); -if ((ret ==0 ) && (strcmp (iftype,"ovpn-dco" ) !=0 )) +if ((ret ==0 ) && (strcmp (iftype,"ovpn" ) !=0 )) { -msg (msglevel,"Interface %s exists and is non-DCO. Disabling data channel offload" , +msg (msglevel,"Interface %s exists and is not using the " +"ovpn DCO driver. Disabling data channel offload" , o->dev);return false; }
src/openvpn/dco_linux.c +5 -2
@@ -159,7 +159,7 @@break ;case -NLE_OBJ_NOTFOUND : -msg (M_INFO ,"%s: netlink reports object not found, ovpn-dco unloaded?" , prefix); +msg (M_INFO ,"%s: netlink reports object not found, ovpn kernel module unloaded?" , prefix);break ;default :
@@ -1248,7 +1248,10 @@ {if (resolve_ovpn_netlink_id (D_DCO_DEBUG ) <0 ) { -msg (msglevel,"Note: Kernel support for ovpn-dco missing, disabling data channel offload." ); +msg (msglevel,"Note: Kernel support for ovpn interfaces missing, " +"disabling data channel offload. Use Linux 6.16.0 or " +"newer with ovpn support or use ovpn-backports for " +"interface support." );return false; }
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: newpatchset
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 5
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: ordex <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Attention: flichtenheld <[email protected]...>
Gerrit-Attention: ordex <[email protected]...>
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveAttention is currently required from: flichtenheld, ordex.
plaisthos has posted comments on this change by plaisthos. ( http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email )
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Patch Set 4:
(2 comments)
File Changes.rst:
http://gerrit.openvpn.net/c/openvpn/+/1550/comment/bc805c66_8a309283?usp=email :
PS4, Line 58: main Linux kernel in 6.16. For this process some API changes were required.
Quoted 1 line
should we say "it was merged" rather than "is moving and being merged" ?
Done
http://gerrit.openvpn.net/c/openvpn/+/1550/comment/5edfa295_ef0f70b7?usp=email :
PS4, Line 59: OpenVPN 2.7 will only support the new API. The new module is called
Quoted 1 line
and maybe here remove "will" and just say "only supports"?
Done
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: comment
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 4
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: ordex <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: flichtenheld <[email protected]...>
Gerrit-Attention: ordex <[email protected]...>
Gerrit-Comment-Date: Thu, 19 Mar 2026 15:59:57 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: ordex <[email protected]...>
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveAttention is currently required from: flichtenheld, plaisthos.
ordex has posted comments on this change by plaisthos. ( http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email )
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Patch Set 5: Code-Review+2
(1 comment)
Patchset:
PS5:
Thanks, LGTM now.
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: comment
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 5
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: ordex <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Attention: flichtenheld <[email protected]...>
Gerrit-Comment-Date: Fri, 10 Apr 2026 13:25:19 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: Yes
PATCH v5 1/1 Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveFrom: Arne Schwabe <[email protected]...>
This tries to ensure that the difference between the old and new module is clearer.
Also removed a duplicate section about --disable-dco from the manual page.
This also changes one instance of ovpn-dco to ovpn that is probably a bug when reusing a tun device.
Gerrit URL: https://gerrit.openvpn.net/c/openvpn/+/1550
---
This change was reviewed on Gerrit and approved by at least one developer. I request to merge it to master.
Gerrit URL: https://gerrit.openvpn.net/c/openvpn/+/1550
This mail reflects revision 5 of this Change.
Acked-by according to Gerrit (reflected above):
Antonio Quartulli <[email protected]...>
Changes.rst +6 -5
@@ -54,11 +54,12 @@ are not readable for ``NT SERVICE\OpenVPNService``. Support for new version of Linux DCO module - OpenVPN DCO module is moving upstream and being merged into the - main Linux kernel. For this process some API changes were required. - OpenVPN 2.7 will only support the new API. The new module is called - ``ovpn``. Out-of-tree builds for older kernels are available. Please - see the release announcements for futher information. + The OpenVPN DCO module has been merged into the Linux kernel in 6.16. + This required some API changes and OpenVPN 2.7 will only supports the + new API. The new module is called ``ovpn``. Out-of-tree builds for + older kernels are available from + https://github.com/OpenVPN/ovpn-backports. Please + see the release announcements for further information. Support for server mode in win-dco driver On Windows the win-dco driver can now be used in server setups.
configure.ac +1 -1
@@ -731,7 +731,7 @@ OPTIONAL_LIBNL_GENL_LIBS="${LIBNL_GENL_LIBS}" AC_DEFINE(ENABLE_DCO, 1, [Enable shared data channel offload]) - AC_MSG_NOTICE([Enabled ovpn-dco support for Linux]) + AC_MSG_NOTICE([Enabled ovpn-dco (via ovpn kernel module) support for Linux]) fi ;; *-*-freebsd*)
doc/man-sections/advanced-options.rst +3 -1
@@ -102,7 +102,9 @@ Data channel offload currently requires data-ciphers to only contain AEAD ciphers (AES-GCM and Chacha20-Poly1305) and Linux with the - ovpn-dco module. + ovpn module. The ovpn module is integrated into the Linux kernel + since 6.16 or available as backport from + https://github.com/OpenVPN/ovpn-backports. Note that some options have no effect or cannot be used when DCO mode is enabled.
doc/man-sections/generic-options.rst +0 -9
@@ -178,15 +178,6 @@ on console) and ``--auth-nocache`` will fail as soon as key renegotiation (and reauthentication) occurs. ---disable-dco - Disable "data channel offload" (DCO). - - On Linux don't use the ovpn-dco device driver, but rather rely on the - legacy tun module. - - You may want to use this option if your server needs to allow clients - older than version 2.4 to connect. - --disable-occ **DEPRECATED** Disable "options consistency check" (OCC) in configurations that do not use TLS.
src/openvpn/dco.c +3 -2
@@ -376,9 +376,10 @@* don't need to have the net_ctx percolate all the way here */ int ret =net_iface_type (NULL , o->dev, iftype); -if ((ret ==0 ) && (strcmp (iftype,"ovpn-dco" ) !=0 )) +if ((ret ==0 ) && (strcmp (iftype,"ovpn" ) !=0 )) { -msg (msglevel,"Interface %s exists and is non-DCO. Disabling data channel offload" , +msg (msglevel,"Interface %s exists and is not using the " +"ovpn DCO driver. Disabling data channel offload" , o->dev);return false; }
src/openvpn/dco_linux.c +5 -2
@@ -159,7 +159,7 @@break ;case -NLE_OBJ_NOTFOUND : -msg (M_INFO ,"%s: netlink reports object not found, ovpn-dco unloaded?" , prefix); +msg (M_INFO ,"%s: netlink reports object not found, ovpn kernel module unloaded?" , prefix);break ;default :
@@ -1248,7 +1248,10 @@ {if (resolve_ovpn_netlink_id (D_DCO_DEBUG ) <0 ) { -msg (msglevel,"Note: Kernel support for ovpn-dco missing, disabling data channel offload." ); +msg (msglevel,"Note: Kernel support for ovpn interfaces missing, " +"disabling data channel offload. Use Linux 6.16.0 or " +"newer with ovpn support or use ovpn-backports for " +"interface support." );return false; }
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveAttention is currently required from: flichtenheld, plaisthos.
mandree has posted comments on this change by plaisthos. ( http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email )
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Patch Set 5: Code-Review-2
(4 comments)
Patchset:
PS5:
Let's improve language before merging.
File Changes.rst:
http://gerrit.openvpn.net/c/openvpn/+/1550/comment/e7879042_626b9a72?usp=email :
PS5, Line 57: The OpenVPN DCO module has been merged into the Linux kernel in 6.16.
```suggestion
The OpenVPN DCO module has been merged into the Linux kernel as of 6.16.
```http://gerrit.openvpn.net/c/openvpn/+/1550/comment/5f918724_336ce375?usp=email :
PS5, Line 58: This required some API changes and OpenVPN 2.7 will only supports the
```suggestion
This required some API changes and OpenVPN 2.7 will only support the
```File doc/man-sections/advanced-options.rst:
http://gerrit.openvpn.net/c/openvpn/+/1550/comment/77ea989c_398c5871?usp=email :
PS5, Line 105: ovpn module. The ovpn module is integrated into the Linux kernel
```suggestion ovpn module. The ovpn module has been integrated into the Linux kernel ```
(assuming it is still available)
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: comment
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 5
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: mandree <[email protected]...>
Gerrit-Reviewer: ordex <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Attention: flichtenheld <[email protected]...>
Gerrit-Comment-Date: Fri, 10 Apr 2026 13:41:04 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: Yes
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveAttention is currently required from: flichtenheld, ordex, plaisthos.
Hello flichtenheld, mandree, ordex,
I'd like you to reexamine a change. Please visit
http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
to look at the new patch set (#6).
The following approvals got outdated and were removed:
Code-Review+2 by ordex
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Try to emphasise the transition from old ovpn-dco to new ovpn module
This tries to ensure that the difference between the old and new module is clearer.
Also removed a duplicate section about --disable-dco from the manual page.
This also changes one instance of ovpn-dco to ovpn that is probably a bug when reusing a tun device.
---
M Changes.rst
M configure.ac
M doc/man-sections/advanced-options.rst
M doc/man-sections/generic-options.rst
M src/openvpn/dco.c
M src/openvpn/dco_linux.c
6 files changed, 18 insertions(+), 20 deletions(-)
git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/50/1550/6
Changes.rst +6 -5
@@ -54,11 +54,12 @@ are not readable for ``NT SERVICE\OpenVPNService``. Support for new version of Linux DCO module - OpenVPN DCO module is moving upstream and being merged into the - main Linux kernel. For this process some API changes were required. - OpenVPN 2.7 will only support the new API. The new module is called - ``ovpn``. Out-of-tree builds for older kernels are available. Please - see the release announcements for futher information. + The OpenVPN DCO module has been merged into the Linux kernel as of + 6.16. This required some API changes and OpenVPN 2.7 only supports + the new API. The new module is called ``ovpn``. Out-of-tree builds + for older kernels are available from + https://github.com/OpenVPN/ovpn-backports. Please + see the release announcements for further information. Support for server mode in win-dco driver On Windows the win-dco driver can now be used in server setups.
configure.ac +1 -1
@@ -731,7 +731,7 @@ OPTIONAL_LIBNL_GENL_LIBS="${LIBNL_GENL_LIBS}" AC_DEFINE(ENABLE_DCO, 1, [Enable shared data channel offload]) - AC_MSG_NOTICE([Enabled ovpn-dco support for Linux]) + AC_MSG_NOTICE([Enabled ovpn-dco (via ovpn kernel module) support for Linux]) fi ;; *-*-freebsd*)
doc/man-sections/advanced-options.rst +3 -1
@@ -102,7 +102,9 @@ Data channel offload currently requires data-ciphers to only contain AEAD ciphers (AES-GCM and Chacha20-Poly1305) and Linux with the - ovpn-dco module. + ovpn module. The ovpn module has been integrated into the Linux kernel + since 6.16 or is available as backport from + https://github.com/OpenVPN/ovpn-backports. Note that some options have no effect or cannot be used when DCO mode is enabled.
doc/man-sections/generic-options.rst +0 -9
@@ -178,15 +178,6 @@ on console) and ``--auth-nocache`` will fail as soon as key renegotiation (and reauthentication) occurs. ---disable-dco - Disable "data channel offload" (DCO). - - On Linux don't use the ovpn-dco device driver, but rather rely on the - legacy tun module. - - You may want to use this option if your server needs to allow clients - older than version 2.4 to connect. - --disable-occ **DEPRECATED** Disable "options consistency check" (OCC) in configurations that do not use TLS.
src/openvpn/dco.c +3 -2
@@ -376,9 +376,10 @@* don't need to have the net_ctx percolate all the way here */ int ret =net_iface_type (NULL , o->dev, iftype); -if ((ret ==0 ) && (strcmp (iftype,"ovpn-dco" ) !=0 )) +if ((ret ==0 ) && (strcmp (iftype,"ovpn" ) !=0 )) { -msg (msglevel,"Interface %s exists and is non-DCO. Disabling data channel offload" , +msg (msglevel,"Interface %s exists and is not using the " +"ovpn DCO driver. Disabling data channel offload" , o->dev);return false; }
src/openvpn/dco_linux.c +5 -2
@@ -159,7 +159,7 @@break ;case -NLE_OBJ_NOTFOUND : -msg (M_INFO ,"%s: netlink reports object not found, ovpn-dco unloaded?" , prefix); +msg (M_INFO ,"%s: netlink reports object not found, ovpn kernel module unloaded?" , prefix);break ;default :
@@ -1248,7 +1248,10 @@ {if (resolve_ovpn_netlink_id (D_DCO_DEBUG ) <0 ) { -msg (msglevel,"Note: Kernel support for ovpn-dco missing, disabling data channel offload." ); +msg (msglevel,"Note: Kernel support for ovpn interfaces missing, " +"disabling data channel offload. Use Linux 6.16.0 or " +"newer with ovpn support or use ovpn-backports for " +"interface support." );return false; }
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: newpatchset
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 6
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: mandree <[email protected]...>
Gerrit-Reviewer: ordex <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Attention: flichtenheld <[email protected]...>
Gerrit-Attention: ordex <[email protected]...>
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveAttention is currently required from: flichtenheld, mandree, ordex.
plaisthos has posted comments on this change by plaisthos. ( http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email )
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Patch Set 5:
(3 comments)
File Changes.rst:
http://gerrit.openvpn.net/c/openvpn/+/1550/comment/1f272870_b45c0d7a?usp=email :
PS5, Line 57: The OpenVPN DCO module has been merged into the Linux kernel in 6.16.
Quoted 1 line
```suggestion […]
Done
http://gerrit.openvpn.net/c/openvpn/+/1550/comment/a79b31e5_93a42920?usp=email :
PS5, Line 58: This required some API changes and OpenVPN 2.7 will only supports the
Quoted 1 line
```suggestion […]
Done
File doc/man-sections/advanced-options.rst:
http://gerrit.openvpn.net/c/openvpn/+/1550/comment/76f7ecca_8775cda6?usp=email :
PS5, Line 105: ovpn module. The ovpn module is integrated into the Linux kernel
Quoted 1 line
```suggestion […]
Done
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: comment
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 5
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: mandree <[email protected]...>
Gerrit-Reviewer: ordex <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: flichtenheld <[email protected]...>
Gerrit-Attention: ordex <[email protected]...>
Gerrit-Attention: mandree <[email protected]...>
Gerrit-Comment-Date: Fri, 10 Apr 2026 14:16:10 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: mandree <[email protected]...>
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveAttention is currently required from: flichtenheld, ordex, plaisthos.
mandree has posted comments on this change by plaisthos. ( http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email )
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Patch Set 6: Code-Review+1
(1 comment)
Patchset:
PS6:
Thanks.
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: comment
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 6
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: mandree <[email protected]...>
Gerrit-Reviewer: ordex <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Attention: flichtenheld <[email protected]...>
Gerrit-Attention: ordex <[email protected]...>
Gerrit-Comment-Date: Fri, 10 Apr 2026 14:17:28 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: Yes
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveAttention is currently required from: flichtenheld, plaisthos.
ordex has posted comments on this change by plaisthos. ( http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email )
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Patch Set 6: Code-Review+2
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: comment
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 6
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: mandree <[email protected]...>
Gerrit-Reviewer: ordex <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Attention: flichtenheld <[email protected]...>
Gerrit-Comment-Date: Sat, 11 Apr 2026 07:59:51 +0000
Gerrit-HasComments: No
Gerrit-Has-Labels: Yes
PATCH v6 1/1 Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archiveFrom: Arne Schwabe <[email protected]...>
This tries to ensure that the difference between the old and new module is clearer.
Also removed a duplicate section about --disable-dco from the manual page.
This also changes one instance of ovpn-dco to ovpn that is probably a bug when reusing a tun device.
Gerrit URL: https://gerrit.openvpn.net/c/openvpn/+/1550
---
This change was reviewed on Gerrit and approved by at least one developer. I request to merge it to master.
Gerrit URL: https://gerrit.openvpn.net/c/openvpn/+/1550
This mail reflects revision 6 of this Change.
Acked-by according to Gerrit (reflected above):
Antonio Quartulli <[email protected]...>
Changes.rst +6 -5
@@ -54,11 +54,12 @@ are not readable for ``NT SERVICE\OpenVPNService``. Support for new version of Linux DCO module - OpenVPN DCO module is moving upstream and being merged into the - main Linux kernel. For this process some API changes were required. - OpenVPN 2.7 will only support the new API. The new module is called - ``ovpn``. Out-of-tree builds for older kernels are available. Please - see the release announcements for futher information. + The OpenVPN DCO module has been merged into the Linux kernel as of + 6.16. This required some API changes and OpenVPN 2.7 only supports + the new API. The new module is called ``ovpn``. Out-of-tree builds + for older kernels are available from + https://github.com/OpenVPN/ovpn-backports. Please + see the release announcements for further information. Support for server mode in win-dco driver On Windows the win-dco driver can now be used in server setups.
configure.ac +1 -1
@@ -731,7 +731,7 @@ OPTIONAL_LIBNL_GENL_LIBS="${LIBNL_GENL_LIBS}" AC_DEFINE(ENABLE_DCO, 1, [Enable shared data channel offload]) - AC_MSG_NOTICE([Enabled ovpn-dco support for Linux]) + AC_MSG_NOTICE([Enabled ovpn-dco (via ovpn kernel module) support for Linux]) fi ;; *-*-freebsd*)
doc/man-sections/advanced-options.rst +3 -1
@@ -102,7 +102,9 @@ Data channel offload currently requires data-ciphers to only contain AEAD ciphers (AES-GCM and Chacha20-Poly1305) and Linux with the - ovpn-dco module. + ovpn module. The ovpn module has been integrated into the Linux kernel + since 6.16 or is available as backport from + https://github.com/OpenVPN/ovpn-backports. Note that some options have no effect or cannot be used when DCO mode is enabled.
doc/man-sections/generic-options.rst +0 -9
@@ -178,15 +178,6 @@ on console) and ``--auth-nocache`` will fail as soon as key renegotiation (and reauthentication) occurs. ---disable-dco - Disable "data channel offload" (DCO). - - On Linux don't use the ovpn-dco device driver, but rather rely on the - legacy tun module. - - You may want to use this option if your server needs to allow clients - older than version 2.4 to connect. - --disable-occ **DEPRECATED** Disable "options consistency check" (OCC) in configurations that do not use TLS.
src/openvpn/dco.c +3 -2
@@ -376,9 +376,10 @@* don't need to have the net_ctx percolate all the way here */ int ret =net_iface_type (NULL , o->dev, iftype); -if ((ret ==0 ) && (strcmp (iftype,"ovpn-dco" ) !=0 )) +if ((ret ==0 ) && (strcmp (iftype,"ovpn" ) !=0 )) { -msg (msglevel,"Interface %s exists and is non-DCO. Disabling data channel offload" , +msg (msglevel,"Interface %s exists and is not using the " +"ovpn DCO driver. Disabling data channel offload" , o->dev);return false; }
src/openvpn/dco_linux.c +5 -2
@@ -159,7 +159,7 @@break ;case -NLE_OBJ_NOTFOUND : -msg (M_INFO ,"%s: netlink reports object not found, ovpn-dco unloaded?" , prefix); +msg (M_INFO ,"%s: netlink reports object not found, ovpn kernel module unloaded?" , prefix);break ;default :
@@ -1248,7 +1248,10 @@ {if (resolve_ovpn_netlink_id (D_DCO_DEBUG ) <0 ) { -msg (msglevel,"Note: Kernel support for ovpn-dco missing, disabling data channel offload." ); +msg (msglevel,"Note: Kernel support for ovpn interfaces missing, " +"disabling data channel offload. Use Linux 6.16.0 or " +"newer with ovpn support or use ovpn-backports for " +"interface support." );return false; }
[Openvpn-devel] [PATCH applied] Re: Try to emphasise the transition from old ovpn-dco to new ovpn module
Mostly this is textual updates which all make sense. There is one actual code change in DCO module probing, and if Antonio says this is fine, it better should be :-) - I have not tested this beyond a simple compile.
Your patch has been applied to the master and release/2.7 branch (primarily documentation improvemnets).
commit b4cb98b5bb51a3edd19aadee1c422e72a63a2326 (master) commit a4936d31633d8259d9f96165511cc2acd78766f5 (release/2.7)
Author: Arne Schwabe Date: Sat Apr 11 11:06:18 2026 +0200
Try to emphasise the transition from old ovpn-dco to new ovpn module
Signed-off-by: Arne Schwabe <[email protected]...>
Acked-by: Antonio Quartulli <[email protected]...>
Gerrit URL: https://gerrit.openvpn.net/c/openvpn/+/1550
Message-Id: <[email protected]...>
URL: https://www.mail-archive.com/[email protected]/msg36573.html
Signed-off-by: Gert Doering <[email protected]...>--
kind regards,
Gert Doering
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archivecron2 has uploaded a new patch set (#7) to the change originally created by plaisthos. ( http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email )
The following approvals got outdated and were removed:
Code-Review+1 by mandree, Code-Review+2 by ordex
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Try to emphasise the transition from old ovpn-dco to new ovpn module
This tries to ensure that the difference between the old and new module is clearer.
Also removed a duplicate section about --disable-dco from the manual page.
This also changes one instance of ovpn-dco to ovpn that is probably a bug when reusing a tun device.
Gerrit URL: https://gerrit.openvpn.net/c/openvpn/+/1550
Message-Id: <[email protected]...>
URL: https://www.mail-archive.com/[email protected]/msg36573.html
---
M Changes.rst
M configure.ac
M doc/man-sections/advanced-options.rst
M doc/man-sections/generic-options.rst
M src/openvpn/dco.c
M src/openvpn/dco_linux.c
6 files changed, 18 insertions(+), 20 deletions(-)
git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/50/1550/7
Changes.rst +6 -5
@@ -54,11 +54,12 @@ are not readable for ``NT SERVICE\OpenVPNService``. Support for new version of Linux DCO module - OpenVPN DCO module is moving upstream and being merged into the - main Linux kernel. For this process some API changes were required. - OpenVPN 2.7 will only support the new API. The new module is called - ``ovpn``. Out-of-tree builds for older kernels are available. Please - see the release announcements for futher information. + The OpenVPN DCO module has been merged into the Linux kernel as of + 6.16. This required some API changes and OpenVPN 2.7 only supports + the new API. The new module is called ``ovpn``. Out-of-tree builds + for older kernels are available from + https://github.com/OpenVPN/ovpn-backports. Please + see the release announcements for further information. Support for server mode in win-dco driver On Windows the win-dco driver can now be used in server setups.
configure.ac +1 -1
@@ -731,7 +731,7 @@ OPTIONAL_LIBNL_GENL_LIBS="${LIBNL_GENL_LIBS}" AC_DEFINE(ENABLE_DCO, 1, [Enable shared data channel offload]) - AC_MSG_NOTICE([Enabled ovpn-dco support for Linux]) + AC_MSG_NOTICE([Enabled ovpn-dco (via ovpn kernel module) support for Linux]) fi ;; *-*-freebsd*)
doc/man-sections/advanced-options.rst +3 -1
@@ -103,7 +103,9 @@ Data channel offload currently requires data-ciphers to only contain AEAD ciphers (AES-GCM and Chacha20-Poly1305) and Linux with the - ovpn-dco module. + ovpn module. The ovpn module has been integrated into the Linux kernel + since 6.16 or is available as backport from + https://github.com/OpenVPN/ovpn-backports. Note that some options have no effect or cannot be used when DCO mode is enabled.
doc/man-sections/generic-options.rst +0 -9
@@ -176,15 +176,6 @@ on console) and ``--auth-nocache`` will fail as soon as key renegotiation (and reauthentication) occurs. ---disable-dco - Disable "data channel offload" (DCO). - - On Linux don't use the ovpn-dco device driver, but rather rely on the - legacy tun module. - - You may want to use this option if your server needs to allow clients - older than version 2.4 to connect. - --disable-occ **DEPRECATED** Disable "options consistency check" (OCC) in configurations that do not use TLS.
src/openvpn/dco.c +3 -2
@@ -376,9 +376,10 @@* don't need to have the net_ctx percolate all the way here */ int ret =net_iface_type (NULL , o->dev, iftype); -if ((ret ==0 ) && (strcmp (iftype,"ovpn-dco" ) !=0 )) +if ((ret ==0 ) && (strcmp (iftype,"ovpn" ) !=0 )) { -msg (msglevel,"Interface %s exists and is non-DCO. Disabling data channel offload" , +msg (msglevel,"Interface %s exists and is not using the " +"ovpn DCO driver. Disabling data channel offload" , o->dev);return false; }
src/openvpn/dco_linux.c +5 -2
@@ -159,7 +159,7 @@break ;case -NLE_OBJ_NOTFOUND : -msg (M_INFO ,"%s: netlink reports object not found, ovpn-dco unloaded?" , prefix); +msg (M_INFO ,"%s: netlink reports object not found, ovpn kernel module unloaded?" , prefix);break ;default :
@@ -1249,7 +1249,10 @@ {if (resolve_ovpn_netlink_id (D_DCO_DEBUG ) <0 ) { -msg (msglevel,"Note: Kernel support for ovpn-dco missing, disabling data channel offload." ); +msg (msglevel,"Note: Kernel support for ovpn interfaces missing, " +"disabling data channel offload. Use Linux 6.16.0 or " +"newer with ovpn support or use ovpn-backports for " +"interface support." );return false; }
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: newpatchset
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 7
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: mandree <[email protected]...>
Gerrit-Reviewer: ordex <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
[Openvpn-devel] [S] Change in openvpn[master]: Try to emphasise the transition from old ovpn-dco to new ovpn module
In reply to a message not in the archivecron2 has submitted this change. ( http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email )
Change subject: Try to emphasise the transition from old ovpn-dco to new ovpn module
......................................................................
Try to emphasise the transition from old ovpn-dco to new ovpn module
This tries to ensure that the difference between the old and new module is clearer.
Also removed a duplicate section about --disable-dco from the manual page.
This also changes one instance of ovpn-dco to ovpn that is probably a bug when reusing a tun device.
Gerrit URL: https://gerrit.openvpn.net/c/openvpn/+/1550
Message-Id: <[email protected]...>
URL: https://www.mail-archive.com/[email protected]/msg36573.html
---
M Changes.rst
M configure.ac
M doc/man-sections/advanced-options.rst
M doc/man-sections/generic-options.rst
M src/openvpn/dco.c
M src/openvpn/dco_linux.c
6 files changed, 18 insertions(+), 20 deletions(-)
Changes.rst +6 -5
@@ -54,11 +54,12 @@ are not readable for ``NT SERVICE\OpenVPNService``. Support for new version of Linux DCO module - OpenVPN DCO module is moving upstream and being merged into the - main Linux kernel. For this process some API changes were required. - OpenVPN 2.7 will only support the new API. The new module is called - ``ovpn``. Out-of-tree builds for older kernels are available. Please - see the release announcements for futher information. + The OpenVPN DCO module has been merged into the Linux kernel as of + 6.16. This required some API changes and OpenVPN 2.7 only supports + the new API. The new module is called ``ovpn``. Out-of-tree builds + for older kernels are available from + https://github.com/OpenVPN/ovpn-backports. Please + see the release announcements for further information. Support for server mode in win-dco driver On Windows the win-dco driver can now be used in server setups.
configure.ac +1 -1
@@ -731,7 +731,7 @@ OPTIONAL_LIBNL_GENL_LIBS="${LIBNL_GENL_LIBS}" AC_DEFINE(ENABLE_DCO, 1, [Enable shared data channel offload]) - AC_MSG_NOTICE([Enabled ovpn-dco support for Linux]) + AC_MSG_NOTICE([Enabled ovpn-dco (via ovpn kernel module) support for Linux]) fi ;; *-*-freebsd*)
doc/man-sections/advanced-options.rst +3 -1
@@ -103,7 +103,9 @@ Data channel offload currently requires data-ciphers to only contain AEAD ciphers (AES-GCM and Chacha20-Poly1305) and Linux with the - ovpn-dco module. + ovpn module. The ovpn module has been integrated into the Linux kernel + since 6.16 or is available as backport from + https://github.com/OpenVPN/ovpn-backports. Note that some options have no effect or cannot be used when DCO mode is enabled.
doc/man-sections/generic-options.rst +0 -9
@@ -176,15 +176,6 @@ on console) and ``--auth-nocache`` will fail as soon as key renegotiation (and reauthentication) occurs. ---disable-dco - Disable "data channel offload" (DCO). - - On Linux don't use the ovpn-dco device driver, but rather rely on the - legacy tun module. - - You may want to use this option if your server needs to allow clients - older than version 2.4 to connect. - --disable-occ **DEPRECATED** Disable "options consistency check" (OCC) in configurations that do not use TLS.
src/openvpn/dco.c +3 -2
@@ -376,9 +376,10 @@* don't need to have the net_ctx percolate all the way here */ int ret =net_iface_type (NULL , o->dev, iftype); -if ((ret ==0 ) && (strcmp (iftype,"ovpn-dco" ) !=0 )) +if ((ret ==0 ) && (strcmp (iftype,"ovpn" ) !=0 )) { -msg (msglevel,"Interface %s exists and is non-DCO. Disabling data channel offload" , +msg (msglevel,"Interface %s exists and is not using the " +"ovpn DCO driver. Disabling data channel offload" , o->dev);return false; }
src/openvpn/dco_linux.c +5 -2
@@ -159,7 +159,7 @@break ;case -NLE_OBJ_NOTFOUND : -msg (M_INFO ,"%s: netlink reports object not found, ovpn-dco unloaded?" , prefix); +msg (M_INFO ,"%s: netlink reports object not found, ovpn kernel module unloaded?" , prefix);break ;default :
@@ -1249,7 +1249,10 @@ {if (resolve_ovpn_netlink_id (D_DCO_DEBUG ) <0 ) { -msg (msglevel,"Note: Kernel support for ovpn-dco missing, disabling data channel offload." ); +msg (msglevel,"Note: Kernel support for ovpn interfaces missing, " +"disabling data channel offload. Use Linux 6.16.0 or " +"newer with ovpn support or use ovpn-backports for " +"interface support." );return false; }
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1550?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email
Gerrit-MessageType: merged
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: Iff9f6811fdf553f59f2afee0072d7bf90133d328
Gerrit-Change-Number: 1550
Gerrit-PatchSet: 7
Gerrit-Owner: plaisthos <[email protected]...>
Gerrit-Reviewer: flichtenheld <[email protected]...>
Gerrit-Reviewer: mandree <[email protected]...>
Gerrit-Reviewer: ordex <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>